Bassface SPL6C.3 6.5" Inch 16.5cm 4Ohm Component Speaker & Tweeter Kit 400w RMS

314 In Stock

RRP: £87.99
  • Website Exclusive Price*** Does not apply in Store
  • Express Delivery also available

SPL6C.3 is a complete component kit, in 6.5/165mm size, but with a difference. The difference is that we have engineered these speakers to offer premium performance at a very tiny price. Using featherweight fibre reinforced paper cones hooked to enormous 110mm (!) high density ceramic magnets via a beefy 37mm voice coil these offer absolutely stunning detail and sonic accuracy. We have also specified large 25mm high end silk dome tweeters to complete the system. The surround is also big news, with a PA/Pro Audio style double style fabric design that doesn't colour the sound and assists in keeping the cone exactly central to the VC. We have, without shame, saved money on simple pressed baskets and a basic crossover shrouded in just heat shrink. We also saved money by not supplying you with any cable or grilles for the mids. The simple crossover does surprisingly well with the natural impedence rise of the mids rolling them off nicely - a lovely open, detailled sound with excellent cohesion between the system. On test, used active with an 80Hz high pass on the mids, 4500Hz low pass crossover at 12db/octave and then 4500Hz high pass on the tweeters at 18db/octave we were able to achieve sound quality that rivals the best we have ever heard, powered off a V2 DB2.2 with a V2 SPL15.2 for lows, in a sealed enclosure run from a DB1.3 - obviously this was an SQ setup but truly the sound was epic from that point of view. Also worthy of note is the slim mounting depth (for the performance) of just 53mm (although given that the woofer is vented out the back we would advise at least 10mm of additional clearance if possible.

Product Data

  • Bassface SKU : SPL6C.3
  • Product Category : Coaxial & Component Speakers
  • Bassface Series : Classic Series
  • Barcode : 683422302114
  • Product Net Weight (g) : 3250
  • Complete Product Pack Weight (g) : 3430
  • Retail Carton L (mm) : 415
  • Retail Carton W (mm) : 180
  • Retail Carton H (mm) : 68
  • Sold As : Kit
  • Disclaimer : Please take care when installing these speakers and be sure to follow the installation guide if applicable. These can be used directly from a Head Unit / Radio but too achieve the Optimum power and Best result our advise would be to run them with the correctly suited Amplifier. If you are uncertain on what Amplifier to use, please ask

Technical Highlights

  • High End Fibre Reinforced Paper Cone Midranges
  • High End Silk Dome Tweeters
  • Extreme Magnet And Lightweight Cone For Incredible Sensitivity
  • Compact Mounting Depth
  • Supplied Without Speaker Cable Or Midrange Grilles

Head Unit Data

Crossover Data

  • Crossover Length (mm) : 80
  • Crossover Height (mm) : 15
  • Crossover Width (mm) : 23
  • Cable Length (m) : .27

TS Parameters

Speaker Data

  • Full Speaker System Max Power : 800
  • Full Speaker System RMS Power : 400
  • Single Speaker Max Power : 200
  • Single Speaker RMS Power : 100
  • Speaker Overall Diameter (mm) : 167
  • Speaker Installation Cutout Diameter (mm) : 140
  • Speaker Grille Depth (mm) : Not Supplied
  • Speaker Overall Depth (mm) : 58
  • Speaker Mounting Depth (mm) : 53
  • Speaker Front Protrusion From Mounting Plane (mm) : 5
  • Full Speaker System Frequency Response (Hz) : 40-22000
  • Speaker Impedance (Ohm) (Nominal) : 4
  • Speaker Sensitivity (db 1Wm) : 105
  • Recommended Cable : PSC12.2
  • Voice Coil Diameter (mm) : 37

Tweeter Data

  • Tweeter Recommended Cable : PSC18.1
  • Tweeter Voice Coil Diameter (mm) : 25
  • Tweeter Overall Depth (mm) : 29
  • Tweeter Mounting Depth (mm) : 14
  • Tweeter Front Protrusion From Mounting Plane (mm) : 15
  • Tweeter Overall Diameter (mm) : 59
  • Tweeter Magnet Diameter (mm) : 30
  • Tweeter Installation Cutout Diameter (mm) : 50
  • Tweeter Max Power (Pair) : 400
  • Tweeter RMS Power (Pair) : 200
  • Tweeter Max Power (Single) : 200
  • Tweeter RMS Power (Single) : 100
  • Tweeter Frequency Response (Hz) : 4000-22000
  • Tweeter Impedance (Ohm) : 4
  • Tweeter Sensitivity (db 1Wm) : 105

Amplifier Data

Battery Data

Whats In The Box?

  • 2 x 6.5" Mid Bass Drivers
  • 2 x Crossover Unis
  • 2 x 1" Silk Dome Tweeters
  • 2 x Tweeter Surface Mounts
  • 2 x Packs Of Mounting Screws And Spire Nuts
Thompsons Ltd


Close Clear All