Bassface DSP8.1 12v Car Audio RCA 31 Band P EQ DSP Crossover Time Alignment 8 Channel Processor

40 In Stock

RRP: £349.99
£251.99
  • Website Exclusive Price*** Does not apply in Store
  • Express Delivery also available

Boasting 8 output channels on RCA and 6 input channels via either High Level or RCA input as well as Optical Fibre input the DSP8.1 is an absolute processing genius. Controlled by PC software the unit offers a full 31 band EQ, both graphic and parametric. This features adjustable Q factor and gain of + and - 12db in steps of just 1 Hz! The Crossover module has adjustable elbows - you can select Butterworth, Linkwitz-Riley or Bessel curves along with slopes from 12db to an astonishing 48db "brick wall" style crossover in steps of 6db! Time delay on every channel is adjustable, also, along with phase. There is an output level adjustment for every channel to prevent input clip, an adjustable noise gate and full input and output gain adjustment also. Finally the unit has a wired remote unit to select the 6 audio presets and adjust level. Along with all of this, the specificaton of the unit is very high, with an incredible set of numbers such as a Signal to Noise ratio in excess of 110db, THD of less than 0.002 % and possible pre out level of up to 13V! Truly we are seeing a digital product here for a digital age.

Product Data

  • Bassface SKU : DSP8.1
  • Product Category : Amplifiers
  • Bassface Series : Classic Series
  • Barcode : 683422298110
  • Product Net Weight (g) : 1120
  • Product Height (mm) : 205
  • Product Length (mm) : 120
  • Product Width (mm) : 36
  • Complete Product Pack Weight (g) : 1760
  • Retail Carton L (mm) : 280
  • Retail Carton W (mm) : 200
  • Retail Carton H (mm) : 85
  • Sold As : Single
  • Disclaimer : Please take when installing your amplifier and be sure to read the Instruction manual on correct set up and Installation. Earthing an amplifier is extremely important and should be done correctly to ensure long life and protection of your product. Please refer to the Images provided and the Online Instruction Manual

Technical Highlights

  • High Quality Metal Chassis
  • PC Software Controlled With Incredible Adjustments
  • Phenomenal Specification, Dynamic Range and Signal To Noise Ratio
  • Remote Control Included
  • High And Low Level Input
  • Built In 31 Band EQ & Parametric EQ With 20Hz > 20Khz Range, 1Hz Resolution. Adjustable Q Factor From 0.404>28.85, 0.01 Resolution. Gain Adjustable From -12db > +12db
  • Built In Crossover With Selectable Curve Types: Butterworth, Linkwitz-Riley, Bessel. Adjustable Slope From 6db > 48db (!) In 6db Divisions. Resolution To 1Hz.
  • Output Phase Either 0 or 180 Degree Each Channel And Time Delay Adjustments From 0 to 20ms Or 0 to 692cm (0 to 272.75inch)
  • Amplitude Limiter With Adjustable Clip Level (CLOSE, 0.070Vpp > 8.658Vpp), Adjustable Response Time (0.3ms > 200ms), Adjustable Release Time (50ms > 5000ms
  • Input Noise Gate With Range CLOSE , -119dBu > -20dBu
  • 6 Adjustable Presets
  • Input And Output Gain Adjustments
  • Dynamic Range > 114db
  • S/N Ratio >110db
  • THD < 0.002%
  • Frequency Response 10Hz > 33000 Khz
  • Input Impedance 20K Ohms
  • Output Impedance 47 Ohms
  • Max RCA Input Voltage 6.5V, Max High Level Input 30V
  • Power Supply DC9 > 15V
  • Auto Turn On
  • Standby Power Consumption < 0.1W

Head Unit Data

Crossover Data

TS Parameters

Speaker Data

Tweeter Data

Amplifier Data

Battery Data

Whats In The Box?

  • 1 x 8 Channel DSP Unit
  • 1 x Remote Control Unit
  • 1 x 5m Remote Cable
  • 1 x Screw Pack
  • 1 x Wiring Harness (Non-ISO)
Thompsons Ltd

Specification


Close Clear All