Pyle Pro Pre Amplifier Phone To Stereo RCA PreAmp Turntable To Line Level Amp

137 In Stock

RRP: £39.99
£20.45
  • Includes Free UK Delivery on Basket Orders Over £50.00***
  • Express Delivery also available
  • ***Vehicle Batteries Not Included

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP999 is perfect for bringing your studio equipment's phono-level output to a more suitable and manageable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP999 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP999 Preamplifier.

Product Data

  • Brand: PYLE-PRO
  • Model: PP999
  • UPC: 0068888717083
  • Sold As: Single
  • Weight: 336 (g)

Key points

  • Converts Phono Signals to Line Level Signals
  • 12-Volt DC 110V Adaptor Included
  • Dedicated RCA Connectors
  • Output Level: 2V
  • Reference Voltage: 1V

More Data

  • Load Impedance: 10K Ohms
  • /
  • S/N Ratio (with A-WTD): 70 dB
  • T.H.D. : 0.08 for 1 KHz 3 mV Input
  • Frequency Response:20 Hz ~ 20 KHz ±2dB
  • Phono - 3 mV / 50K Ohms//
  • Input Sensitivity / Impedance / Phono - 3 mV / 50K Ohms
  • Dimensions (W x H x D):3.54'' x 2.13'' x 1.02''
  • Weight : 0.88 Lbs
  • Dimensions: H:25mm W:55mm D:90mm
  • 12 Month Manufactures Warranty

Whats In The Box?

Impedance / Phono - 3 mV / 50K Ohms | Dimensions (W x H x D):3.54'' x 2.13'' x 1.02'' | Weight : 0.88 Lbs | //

More Detail and Summary

Converts Phono Signals to Line Level Signals | 12-Volt DC 110V Adaptor Included | Dedicated RCA Connectors | Output Level: 2V | Reference Voltage: 1V | Load Impedance: 10K Ohms | S/N Ratio (with A-WTD): 70 dB | T.H.D. : 0.08 for 1 KHz 3 mV Input | Frequency Response:20 Hz ~ 20 KHz ±2dB | Input Sensitivity / Impedance / Phono - 3 mV / 50K Ohms | Dimensions (W x H x D):3.54'' x 2.13'' x 1.02'' | Weight : 0.88 Lbs |

Thompsons

Specification


Close Clear All