Bassface SPL10.3 1600w 10" Inch 25cm 2x2Ohm DVC Subwoofer

55 In Stock

RRP: £103.99
£78.99
  • Includes Free UK Delivery on Basket Orders Over £50.00
  • Express Delivery also available

The SPL10.3 – This is the dual 2 ohm little brother to the SPL12.2 but now, unlike the preceeding 10.2 we have borrowed the motor structure from the 12 and shoe horned it on to the 10 inch chassis resulting in phenomneal performance at an amazing price point. Ideal in both sealed and ported enclosures, it can be run in a compact enclosure for tight accurate bass or a larger ported enclosure, giving higher output potential at the tuning frequency of the cabinet. We have added a deep bump in the back plate to allow for large excursion.

"Prototype ? No prototype was necessary because SPL10.3 is the same as the SPL10.2 but using the motor assembly and magnet borrowed from the hugely successful SPL12.2V1 - Introdued to devleop the SPL10.2 to the next level. Initially available in only DVC 2 Ohm version - arrived to market June 2017."

Product Data

  • Brand: Bass Face Car Audio
  • Model: SPL10.3.2
  • UPC: 683422302367
  • Sold As: Single
  • Bass Face Series: Hammer Series
  • Version: 1
  • Weight: 6400 (g)
  • Product Length: 280 (mm)
  • Product Width: (mm)
  • Product Height: 165 (mm)

Key points

  • Super High Density Double Stacked Ceramic Magnets
  • Extreme Duty Non Pressed Paper Cone
  • Dual High Temperature Voice Coils on BASV Former Designed for use in enclosures from 1 cubic feet (hard bass) up to 2 cubic feet (low bass)
  • Recommended Box - Ported 1.2 Cubic Feet Tuned to 40Hz
  • Extra Large Bumped Pole Piece for Increased Excursion

More Data

  • Cast Aluminium Basket
  • Treated Oversize Double Stitched Foam Surround
  • Extra Large Dust-cap Assists Structurally
  • Quick Release Push Terminals
  • Full Max Power : 1600 (30Hz Subsonic, 100Hz High Pass)
  • Full RMS Power :800 (30Hz Subsonic, 100Hz High Pass)
  • Speaker Overall Diameter With Lugs (mm) : 280
  • Speaker Overall Diameter With Grilles (mm) : 280
  • Speaker Overall Diameter (mm) : 280
  • Speaker Magnet Diameter (mm) (Including Magnet Protector Where Applicable) : 140
  • Speaker Installation Cutout Diameter (mm) : 140
  • Speaker Impedance (Ohm) (Nominal) : 2+2
  • Recommended Cable : PSC10.1

Whats In The Box?

  • 1 x High Performance Dual Voice Coil Subwoofer
Thompsons

Specification


Close Clear All