Bassface DB1.2 DB1.2 2000w Car Audio Amp Amplifier 2 Farad Power Cap Wiring Kit

0 In Stock

RRP: £287.95
£190.80
In Stock Reminder

In Stock Reminder

Please enter your email address to be alerted when this item is back in stock.

Our Big sister of the DB1.1PACK, the DB1.2PACK, even more Power, even more grunt, it comes complete with all the Power you need to run your high powered Subwoofer. In the Package we have included our legendary DB1.2, the big sister of the DB1.1. The new circuit board also allows us to announce 1 ohm stability which further broadens the range of system applications and subwoofer configurations that DB1.2 can be used in. The new DB1.2 offers its user an outstanding balance of power and sound quality. The DB1.2 was developed specifically to be a heavier duty version of the DB1.1. Building on the series architecture of an oversize power supply and efficient heat-sink design the DB1.2 will run hard for extended listening periods without being overworked. With Class D topology, the DB1.2 is highly efficient in power exchange and delivery; less power wasted, less heat generated, less distortion and longer service life. The circuit design is robust enough to deliver powerful bass while remaining poised and refined, producing a balanced accurate sound across the full bass audio spectrum. At detail level we included 2 positive and 2 negative speaker terminals making it easier for you to connect two subwoofers or dual voice coil subwoofers to the one amplifier. Naturally there is a full set of sound controls; variable low pass, variable subsonic filter and a parametric bass boost (frequency and level). For those tracks that deserve “just that bit extra” we also included a wired cockpit bass remote for on the fly adjustment. Our CAP2.1 Designed to add stability to the power supply in demanding applications, our neat 2 Farad capacitor features a clear digital voltage readout and chrome terminals. The product ships with mounting hardware to make installation simple. Adding a capacitor to your system will improve the bass response significantly, as well as tightening up the midbass performance and helping to minimise system distortion. Also, adding a cap should minimise the effects of bass on other vehicle functions such as lighting. (Note that this capacitor is not suitable for use in 24v nominal applications such as commercial vehicles) and of course we have included our official Bassface Wiring Kit PWK4.1 with a 5m Bassface RCA cable for complete power connectivity. Our PWK4.1 kits combine our high quality, true gauge 15% Copper CCA Super flexible power cable, with a suitable fuse and fuse holder, 5m remote wire, terminals and accessories you need for a successful power install. Our cables feature an extremely flexible and very durable protective sheath enabling them to flex much more than more common traditional plastic. This makes it a lot easier to work with and helps provide a more durable and professional install. The fuse holders are all matched to the current handling of the cables and have features to protect the cable ends and enable good contact. 5m of blue remote wire and of course a 5m Bassface RCA cable, Our PRCA5.1 cables and interconnects feature 2 twisted pair cores of 10x0.12mm Pure OFC copper and the same very flexible insulation found across the wiring range. This approach offers a great balance between sound quality and interference rejection in the harsh mobile environment. Custom tooled slimline lightweight RCA connectors with gold plate finish offer good clamping force and great conductivity

Product Data

  • Bassface SKU : DB1.2PACK
  • Product Category : Audio Package
  • Barcode : 617529407441
  • Product Net Weight (g) : 5996
  • Complete Product Pack Weight (g) : 5397
  • Sold As : Kit

Technical Highlights

  • Amplifier : Latest Version Of Our Mid Range Compact Mono
  • Highly Efficient Class D Topology
  • Variable Bass Boost Level and Frequency
  • Variable Low Pass Filter
  • T.D.O.S. Amplifier Protection Circuitry
  • Variable Subsonic Filter
  • Up To 6V Ready Pre Amp Input Stage
  • O.P.S. Oversized Power Supply
  • Thermally Efficient Heatsink Coating
  • Low THD Audiophile Components
  • High Density Cast Aluminium Heatsink Body
  • Power Cap : Includes mounting straps width 124mm
  • 2 Farad Capacity with 24V DC Surge
  • Super Low ESR for Fast Charge/Discharge
  • Integrated Digital DC Voltmeter
  • Chromed Connectors
  • See-Thru Top Exposing Components

Head Unit Data

Crossover Data

TS Parameters

Speaker Data

Tweeter Data

Amplifier Data

  • Maximum Unfused Power (Watts) : 2000
  • Maximum Unfused RMS (Watts) : 1000
  • RMS Per Channel 4 Ohm (Watts) : 500
  • RMS Per Channel 2 Ohm (Watts) : 750
  • RMS Per Channel 1 Ohm (Watts) : 1000
  • Amplifier Frequency Response (Hz) : 10-1000
  • Amplifier THD Continous 4 Ohm 1Khz(100Hz) (%) : <0.1
  • Amplifier Signal To Noise Ratio (db) : >96
  • Amplifier LPF (Hz) : 40-180
  • Amplifier Bass Boost (Db) : 0-12
  • Amplifier Boost Frequency (Hz) : 30-80
  • Amplifier Subsonic Filter (Hz) : 15-50
  • Amplifier Audio Signal Input Voltage (V) : 0.2-6
  • Amplifier LPF Slope (Db)(Oct) : 12
  • Amplifier Subsonic Filter Slope (Db)(Oct) : 12
  • Amplifier Topology : Class D
  • Amplifier Fuse Rating (Amps) : 120
  • Amplifier Power Wire Input Gauge (AWG) : 4
  • Recommended Wiring Kit and Accessories : PWK4.1 RCA5.1
  • Minimum Recommend Final Load Per Channel (Ohms) : 1

Battery Data

Whats In The Box?

  • 1 1 x CAP2.1
  • 2 1 x DB1.2
  • 3 1 x PWK4.1
  • 4 1 x PRCA5.1
Thompsons

Specification


Close Clear All