Bassface SPL6C.2 900w 6.5" Inch 16.5cm 4Ohm Component Speaker & Tweeter Kit

20 In Stock

RRP: £113.99
  • Includes Free UK Delivery on Basket Orders Over £50.00
  • Express Delivery also available

Now featuring different baskets enabling a larger cone area for increased output and heavy gauge speaker wire packaged as standard. The SPL6C.2 component speakers are a tour de force of sound reproduction technology. With a full 40mm voice coil they are primed to deliver terrific mid bass response. Lightweight construction allows them to deliver finesse as well as power. A massive magnet structure might make it a little less easy to fit but the trade off is excellent transient response and better dynamics. The tweeters are pure silk domes which are outfitted with Neodymium magnets keeping the size down and the power capabilities right up. We use silk done tweeters throughout our whole range of speakers apart from the bullet tweeters because silk gives a more natural response than the harshness that can sometimes be present in plastic or mylar domes. This of course is more expensive but it has been paid for by not printing pretty pictures on our packing boxes and by not including printed instructions (instead get your up to the minute instruction pack at our website). This is just one example of how we have optimised our products to give you the best possible performance for you money which is something we feel very strongly about. Big motors, stiffer steel baskets, tweaks to the cone for increased stiffness and larger more powerful magnets are the key to the increased performance of the latest model. Detail adjustments such as tighter tolerances on crossover components ensures that we get the same high quality reproduction on every pair made and deliver consistency to the end user.

Prototype ? We wanted to replace the SPL6C.1 with an updated and upgraded successor. This is the SPL6C.2 with stiffer cones, higher power handling and better tweeter housing. V1 ? The V1 featured a basket that was popular because its easy to fit but we foun that the cone was a little smaller than optimal for a six inch setup. And the wire was basic. V2 ? The V2 (all new ones) now features a revised basket that makes a better fitment and increases the cone diameter by 10mm compared to the V1. Also we had high quality heavy gauge wire put in the box instead of the original thinner gauge.

Product Data

  • Brand: Bass Face Car Audio
  • Model: SPL6C.2
  • UPC: 617529407298
  • Sold As: Kit
  • Bass Face Series: Classic Series
  • Version: 2
  • Weight: 3500 (g)
  • Product Width: (mm)

Key points

  • Tech-One White Woven Composite Cone
  • Heavy Gauge Steel Basket
  • Massive Super High Density Ceramic Magnet
  • Multi Layer Aluminium Voice Coil
  • Aerospace Grade Rubber Surround Suspension

More Data

  • Highly Musical Silk Dome Tweeter
  • Sibilance Free Bar Type Tweeter Dome Protection
  • 3 Position Tweeter Level Switch -3db / 0db / +3db
  • Full Max Power (Pair) : 900
  • Full RMS Power (Pair) : 450
  • Speaker Overall Diameter With Lugs (mm) : 165
  • Speaker Overall Diameter With Grilles (mm) : 165
  • Speaker Overall Diameter (mm) : 165
  • Speaker Installation Cutout Diameter (mm) : 145
  • Speaker Grille Depth (mm) : 23
  • Speaker Overall Depth (mm) : 75
  • Speaker Mounting Depth (mm) : 65
  • Speaker Front Protrusion From Mounting Plane (mm) : 10
  • Speaker Frequency Response (Hz) (Indicative Of Usable Range But Not Suitability) : 40-23000
  • Speaker Impedance (Ohm) (Nominal) : 4
  • Recommended Cable : PSC16.2
  • Tweeters Max Power (Pair) : 200
  • Tweeters RMS Power (Pair) : 100

Whats In The Box?

  • 2 x 6.5" Mid Bass Drivers
  • 2 x Crossover Unis
  • 2 x 0.75" Silk Dome Tweeters
  • 2 x Tweeter Flush Mounts
  • Screw Pack With Mounting Hardware
  • 4 x 1m Lengths of Wire With Spade Terminals on 1 End
  • 2 x 3m lengths of Basic Speaker Wire


Close Clear All