Lanzar OPTI 2 Two Channel Stereo Competition Car Speaker Amplifier 2000w

0 In Stock

RRP: £512.99
£209.24
In Stock Reminder

In Stock Reminder

Please enter your email address to be alerted when this item is back in stock.

Its back!! The ever favoured Opti500X2! Proper competition grade, competition power, competition quality stereo amplifier straight from the USA! These babies push out a TRUE 500w RMS per channel at 4 Ohms and 750w RMS at 2 Ohms. Not your ordinary stereo amp and obviously no liar either, with 4 40 Amp fuses its max output is 2300w at 14 volts. Very steep 24db/Octave slope crossover network, High pass and Low pass, keeping your speakers protected and running at optimum frequencies. Super low 0.04% THD and very high 100db signal to noise ratio are obvious marks and a seriously high quality piece of kit. Just as happy running two 2 Ohm subs as 4 high power component sets. This amp is as versatile as it is brutal. A proper serious amp for a proper serious install.

Product Data

  • Brand: Lanzar
  • Model: OPTI500X2
  • UPC: 068888725705
  • Sold As: Single
  • Weight: 9893 (g)

Key points

  • 500 Watts x 2 RMS Power @ 4 Ohms
  • 1000 Watts x 2 Max Power @ 4 Ohms
  • 2000 Watts x 1 Max Power @ 4 Ohms Bridged
  • 750 Watts x 2 Watts RMS Power @ 2 Ohms
  • Electronic Crossover Network

More Data

  • Bass Boost Circuit
  • Bridgeable at 4 Ohms
  • 2 Ohm Stereo Stable
  • Double Sided Epoxy PCB Circuit Board
  • Gold Plated RCA Inputs
  • Line Outs for Left and Right Channels
  • Low Pass Filter Controls
  • High Pass Filter Controls
  • Subwoofer Remote Level Control
  • Power and Protection LED Indicators
  • /
  • Soft Turn On/Off
  • Minimum Speaker Impedance: 2 Ohms
  • THD: 0.04%
  • /
  • S/N Ratio: 100dB
  • Channel Separation: 60dB
  • Dimensions: H:58mm W:256mm D:590mm
  • 12 Month Manufactures Warranty

Whats In The Box?

N Ratio: 100dB | Channel Separation: 60dB | //

More Detail and Summary

500 Watts x 2 RMS Power @ 4 Ohms | 1000 Watts x 2 Max Power @ 4 Ohms | 2000 Watts x 1 Max Power @ 4 Ohms Bridged | 750 Watts x 2 Watts RMS Power @ 2 Ohms | Electronic Crossover Network | Bass Boost Circuit | Bridgeable at 4 Ohms | 2 Ohm Stereo Stable | Double Sided Epoxy PCB Circuit Board | Gold Plated RCA Inputs | Line Outs for Left and Right Channels | Low Pass Filter Controls | High Pass Filter Controls | Subwoofer Remote Level Control | Power and Protection LED Indicators | Soft Turn On/Off | Minimum Speaker Impedance: 2 Ohms | THD: 0.04% | S/N Ratio: 100dB | Channel Separation: 60dB |

Thompsons

Specification


Close Clear All