Bassface DB2.1 800w 2/1 Channel Bridgeable Stereo 12v Power Amplifier

188 In Stock

RRP: £76.99
£61.99
  • Includes Free UK Delivery on Basket Orders Over £50.00
  • Express Delivery also available

Now shipping Version 5 of this product - The DB2.1 is a bridgeable 2 channel amplifier endowed with excellent sound control features and advanced protection circuitry. Designed principally for use as a stereo amp to run high powered coaxial or component speakers, it produces a beautifully wide and controlled sound. The amplifier can also be used to run small lightweight subwoofers and offers good performance for its size due to its mono-inspired power supply design, integrated subsonic filter and fully adjustable crossover controls. Also fitted with an RCA line output, the Bassface DB2.1 makes it very easy and convenient to connect from one source RCA, making the addition of extra amplification simple further down the line. The DB2.1 has evolved over almost six years into a sonically excellent, reliable and still very affordable quality automotive amplifier.

A product that has been in the lineup since the start of the Bassface brand. The DB2.1 was created to be an inexpensive, high quality, reliable amp and it continues to be exactly that. V1 ? Exactly what it said on the tin. V2 ? The same but production moved to a new location. V3 ? Same again with improved output by changing a few components. V4 ? 2016 styling and black terminal posts. V5 - Assembiles from November 2016. Following analysis in detail the amplifier has undergone improvements. Transformers and inductors are affixed to the PCB using improved adhesive. New output transistors for significant extra power. Reverse polarity connection protection upgraded to improve chances of withstanding a reverse connection. The circuit board has been lifted in the case to align the controls better and a rounded mounting foot has been introduced also to remove sharp edges. Crossover distortion has been reduced due to detail changes on the board. Felt strips have been added under the baseplate to ensure no rattles.

Product Data

  • Brand: Bass Face Car Audio
  • Model: DB2.1
  • UPC: 608938356383
  • Sold As: Single
  • Bass Face Series: Assault Series
  • Version: 5
  • Weight: 1940 (g)
  • Product Length: 200 (mm)
  • Product Width: (mm)
  • Product Height: 62 (mm)

Key points

  • Class AB Amplifier
  • K3 Logic Circuit Super Wide 10hz-30khz Range
  • T.D.O.S. Amplifier Protection Circuitry
  • O.P.S. Oversized Power Supply
  • Up To 6V Ready Pre Amp Input Stage

More Data

  • Low THD Audiophile Components
  • Cast Aluminium Heatsink Body with rounded edges
  • Thermally Efficient Heatsink Coating
  • Variable Low-Pass Crossover
  • Variable High-Pass Crossover
  • Adjustable Sub Sonic Filter
  • Line Output For Daisy Chain Amplifier Applications
  • Variable Bass Boost Control
  • Max Power : 800
  • Max RMS Power : 400
  • RMS 4 Ohm Per Channel : 100
  • RMS 2 Ohm Per Channel : 200
  • Amplifier Frequency Response (Hz) : 10-30000
  • Amplifier THD Continous 4 Ohm 1Khz/100Hz (%) : <0.05
  • Amplifier Signal To Noise Ratio (db) : >98
  • Amplifier LPF (Hz) : 50-250
  • Amplifier HPF (Hz) : 80-1200
  • Amplifier Bass Boost (Db) : 0-12
  • Amplifier Boost Frequency (Hz) : 40
  • Amplifier Subsonic Filter (Hz) : 20-50
  • Amplifier Audio Signal Input Voltage (V) : 0.2-6
  • Amplifier LPF Slope (Db/Oct) : 12
  • Amplifier HPF Slope (Db/Oct) : 12
  • Amplifier Subsonic Filter Slope (Db/Oct) : 12
  • Amplifier Topology : Class A/B
  • Amplifier Fuse Rating (Amps) : 25
  • Amplifier Power Wire Input Gauge (AWG) : 8
  • Recommended Wiring Kit and Accessories : PWK8.1 RCA5.1
  • Minimum Recommend Final Load Per Channel (Ohms) : 4

Whats In The Box?

  • 1 x High Power 2 Channel Amplifier
  • 4 x Self tapping screws
  • 1 x Spare 25A fuse
Thompsons

Specification


Close Clear All