Bassface DB1.3 5000w 1Ohm Class D Monoblock Subwoofer 12v Power Amplifier

72 In Stock

RRP: £333.99
  • Includes Free UK Delivery on Basket Orders Over £50.00
  • Express Delivery also available

Boasting improved performance, 0 AWG power terminals and a host of detail changes the new DB1.3 is a powerhouse in a compact and very sleek package. Using ahuge oversized Class D power supply the DB1.3 uses the same architecture as its smaller sibling for big kicks and extended low tones. But with the DB1.3 you get double the output. The DB1.3 is also able to be run at 16v if you have an advanced power set up. You can make the most of this and enjoy even more power output from your amplifier. The DB1.3 is a competition grade mono-block amp for serious bass installs and is perfect for driving our larger woofers. Now featuring a new remote control with clip light and display. Throughout Europe the DB1.3 has become the go-to choice of avantegard enthusiasts who want enormous power with reliablity, repeatability and great value.

Prototype ? Initially there were 10 prototypes created and tested. Design issues were addressed and noted but the overall quality and performance was good enough to warrant a production model. V1 ? A small batch was made with the design flaws fixed. Most were exported onto the continent. V2 ? A larger batch was made and these had the addition of larger 0 AWG power terminals. These had text printed on the top and yellow PCB. 16v operational voltage introduced. V3 ? Slight design tweaks to the board layout to improve reliability under low impedances. Blue PCB board and some other aesthetic tweaks. Improved packaging. V4 ? Further reliability tweaks and doubling of power supply capacitor bank. Also a controlled line level output for reliably ?daisy chaining? for larger multi amp systems, enabling accurate gain control of all amps from 1 remote. New remote control with clip light. Visually this model has the new logo panel and omits the printing on the top panel.

Product Data

  • Brand: Bass Face Car Audio
  • Model: DB1.3
  • UPC: 617529407717
  • Sold As: Single
  • Bass Face Series: Hammer Series
  • Version: 4
  • Weight: 5000 (g)
  • Product Length: 430 (mm)
  • Product Width: (mm)
  • Product Height: 60 (mm)

Key points

  • Latest Version Of Our Contest Winning Mono Amplifier
  • Incredible Power - Fantastic Value Per Watt
  • Remote control with clip light
  • Highly Efficient Class D Topology
  • Load Optimised for Transient Stability at Low Impedance's

More Data

  • T.D.O.S. Amplifier Protection Circuitry
  • O.P.S. Oversized Power Supply
  • Up To 6V Ready Pre Amp Input Stage
  • Low THD Audiophile Components
  • Variable Phase 0-180 Degrees
  • High Density Cast Aluminium Heatsink Body
  • Thermally Efficient Heatsink Coating
  • Variable Subsonic Filter
  • Variable Bass Boost
  • Variable Low Pass Crossover
  • Max Power : 5000
  • Max RMS Power : 2500
  • RMS 4 Ohm Per Channel : 1000
  • RMS 2 Ohm Per Channel : 1500
  • RMS 1 Ohm Per Channel : 2500
  • Amplifier Frequency Response (Hz) : 10-180
  • Amplifier THD Continous 4 Ohm 1Khz/100Hz (%) : <0.1
  • Amplifier Signal To Noise Ratio (db) : >96
  • Amplifier LPF (Hz) : 40-180
  • Amplifier Bass Boost (Db) : 0-12
  • Amplifier Boost Frequency (Hz) : 30-80
  • Amplifier Subsonic Filter (Hz) : 0-50
  • Amplifier Audio Signal Input Voltage (V) : 0.2-8
  • Amplifier LPF Slope (Db/Oct) : 12
  • Amplifier Subsonic Filter Slope (Db/Oct) : 12
  • Amplifier Topology : Class D
  • Amplifier Fuse Rating (Amps) : 250
  • Amplifier Power Wire Input Gauge (AWG) : 4
  • Recommended Wiring Kit and Accessories : PWK4.1 RCA5.1
  • Minimum Recommend Final Load Per Channel (Ohms) : 1

Whats In The Box?

  • 1 x High Performance Mono Amplifier
  • 1 x Bass remote level control
  • 1 x 5m level control cable
  • 4 x Self tapping screws


Close Clear All